[aprssig] GO32/UVIEW-32 problems

[gerheim at cox.net]

It always pays to talk to the experts!


---- Bob Bruninga  <bruninga at usna.edu> wrote: 
> > ... On the outgoing portion of the 84 degree pass, 
> > I put the D7 into APRS mode, ... and it immediately
> >  decoded lots and lots of packets, 
> > while UIVIEW reported nothing.   
> 
> The packet BAUD setting and APRS baud setting are two different settings.  One is under RADIO-TNC and the other is under APRS-BAUD RATE or something like that.  So for UIVIEW you have to change the one in the RADIO menu. 
> 
> OR... just go to terminal mode in UIview and change it on the fly using the TNC's HB command.  Set HB to 9600. 
> 
> Maybe that was it?  The front panel should have shown "96" if you were in the correct baud rate...
> 
> Bob
> WB4APR
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

--
-Al Gerheim

HP-49G+ Software Page:
http://members.cox.net/above