[aprssig] FINDU RAW DATA Question

[William McKeehan]

I did a similar thing. It only takes one packet at a time...

http://mckeehan.homeip.net/cgi-bin/aprs/viewpacket.pl

But my pages recognizes the packet as follows:

N0EOP-14>SY4Y0Q,W8GUC,KB9GYO-3,WIDE2*,qAo,KC9HAX:'pQ8l"1v/]"44}
APRS Data Type= Current Mic-E data
Radio= Kenwood TM-D700
Message Type= /M1/En Route
Lat= 39 deg 49.01 min N Long= 84 deg 53.28 min W
Icon= Van Overlay= (none)
Course= 221 deg Speed= 0 knots (0.0 mph 0.0 kph 0.0 m/s)
Altitude= 95 feet (29 meters)


-- 
William McKeehan

On Fri, May 25, 2007 10:32 am, Kai Gunter Brandt wrote:
> Dave wrote:
>> Hello,
>>    Here is what shows on findu for n0eop-14
>> Raw packet: N0EOP-14>SY4X6W,W8GUC*,WIDE2-1,qAo,KC7EHJ:'pQIl !v/]
>> Will someone break down what the raw packet is telling me?
>>
>>
> N0EOP-14>SY4Y0Q,W8GUC,KB9GYO-3,WIDE2*,qAo,KC9HAX:'pQ8l"1v/]"44}
>
> is the same as:
>
> Record #1
> N0EOP-14>SY4Y0Q,W8GUC,KB9GYO-3,WIDE2*,qAo,KC9HAX:\'pQ8l\"1v/]\"44}
> APRS Data Type= (** Beacon, not APRS)
>
> Use i.e
>
> www.scannernytt.info/APRS/aprs.html
>
> to translate.
> No error controll and only allows 15lines of rawpackets
> And yes if someone translates something and you reload you get the wrong
> data.
>
>
> I just made the script awailable for my own debugging.
>
> LA3QMA
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>