[TangerineSDR] [EXTERNAL] RX888D - how to start ?

[Bill Engelke]

Tom - Actually, my advice on this (from yesterday) very likely is obsolete; KA9Q has made major changes to the system, so I don't know if the earlier guidance on how to build the system still works. Potentially, Franco's info is better at this time...   -73- Bill

From: TangerineSDR <tangerinesdr-bounces at lists.tapr.org> On Behalf Of Tom McDermott via TangerineSDR
Sent: Monday, July 24, 2023 9:37 PM
To: TAPR TangerineSDR Modular Software Defined Radio <tangerinesdr at lists.tapr.org>
Cc: Tom McDermott <tom.n5eg at gmail.com>
Subject: Re: [TangerineSDR] [EXTERNAL] RX888D - how to start ?

Hi Bill.  I do not know about edits to the makefile, are those documented somewhere?
I ran make (and make install) on the makefile as distributed by git (unedited) and it completed without errors. It created
rx888.o   but no file called rx888d.something

-- Tom, N5EG



On Mon, Jul 24, 2023, 6:31 PM Bill Engelke via TangerineSDR <tangerinesdr at lists.tapr.org<mailto:tangerinesdr at lists.tapr.org>> wrote:
Tom - did  you edit the makefile and run a make? You have to compile rx888d - 73- Bill

From: TangerineSDR <tangerinesdr-bounces at lists.tapr.org<mailto:tangerinesdr-bounces at lists.tapr.org>> On Behalf Of Tom McDermott via TangerineSDR
Sent: Monday, July 24, 2023 6:40 PM
To: hamsci at googlegroups.com<mailto:hamsci at googlegroups.com>; TAPR TangerineSDR Modular Software Defined Radio <tangerinesdr at lists.tapr.org<mailto:tangerinesdr at lists.tapr.org>>
Cc: Tom McDermott <tom.n5eg at gmail.com<mailto:tom.n5eg at gmail.com>>
Subject: [EXTERNAL] [TangerineSDR] RX888D - how to start ?

The RX888D MKII has been received, installed ka9q-radio, created fft nwisdom, installed & started avahi.

In trying to start rx888d as standalone, and as daemon, there seem to be missing some files.

./rx888d g5rv &   - fails no such file or directory

The only things $find / -name 'rx88*'    found are:

/home/tom/ka9q-radio/rx888d at .service<mailto:/home/tom/ka9q-radio/rx888d at .service>
/home/tom/ka9q-radio/rx888.h
/home/tom/ka9q-radio/rx888.o
/home/tom/ka9q-radio/rx888.c
/home/tom/ka9q-radio/rx888d.conf

Thus the command(s) to run rx888d fail.  Was an rx888d executable supposed to be generated?

-- Tom, N5EG
--
TangerineSDR mailing list
TangerineSDR at lists.tapr.org<mailto:TangerineSDR at lists.tapr.org>
http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20230725/7e3c7551/attachment-0001.html>