[TangerineSDR] TangerineSDR Digest, Vol 14, Issue 28
Julius Madey
hillfox at fairpoint.net
Tue May 19 20:30:56 EDT 2020
Dave, I like the config file idea.
Jules
On 5/19/2020 12:00 PM, tangerinesdr-request at lists.tapr.org wrote:
> Send TangerineSDR mailing list submissions to
> tangerinesdr at lists.tapr.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org
> or, via email, send a message with subject or body 'help' to
> tangerinesdr-request at lists.tapr.org
>
> You can reach the person managing the list at
> tangerinesdr-owner at lists.tapr.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TangerineSDR digest..."
>
>
> Today's Topics:
>
> 1. Magnetometer Software (David Witten)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 19 May 2020 10:00:49 -0500
> From: David Witten <wittend at wwrinc.com>
> To: Julius Madey <hillfox at fairpoint.net>, tangerinesdr at lists.tapr.org
> Subject: [TangerineSDR] Magnetometer Software
> Message-ID:
> <CABJ3BVMt1qWfo3AKLYRpMAs-mx4cWy7Y20GODm6b_E1BJYYknw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Julius,
>
> Thanks a lot for testing this out. Your input has been extremely helpful.
>
> I tried changing the cycle count to 400, but the gain correction didn't
>> change to follow that. I can use the raw data and apply the correct gain
>> value, however the processed values are only accurate at the default cycle
>> count of 200.
>> Only other features I can think of at this point are:
>> (1) perhaps limiting cycle count choices to 200, 300, 400 with
>> appropriate gain correction for each
>>
> This is at the top of my list to fix. I have code to sanity check the input
> for this setting - limit option to allowed values - but I haven't set it up.
>
>
>> (2) displaying 2 decimal points of resolution on the processed values
>> which provides 10's of nanoTeslas resolution ... more or less on the order
>> of the hoped for resolution of this magnetometer
>>
> Easily done, I'll see to it.
>
>
>> (3) setting the NOS register for 'on board' averaging
>
> I just didn't understand the wording in some of the documentation around
> this. You are probably right.
>
> I'm also considering a couple of other things:
>
> 1. Allow settings to be saved to a config file that is read on startup.
> 2. A Read / Execute / Print / Loop (REPL) mode for more interactive
> testing. - this may be overkill.
> 3. documentation (haha)
>
> Thanks!,
> Dave, KD0EAG
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200519/48f08548/attachment-0001.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> TangerineSDR mailing list
> TangerineSDR at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org
>
>
> ------------------------------
>
> End of TangerineSDR Digest, Vol 14, Issue 28
> ********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20200519/df4d0940/attachment.html>
More information about the TangerineSDR
mailing list