[TangerineSDR] Magnetometer Spec update to V0.3

[Nathaniel Frissell]

Hi Tom,

This magnetometer document looks fine to me, and I think it will work well
for our application. I see the that the resolution of this sensor depends
on cycle counts, with 200 cycles for 13 nT. It also says the circuit
operates at 180 kHz... so, am I correct in saying that could potential make
900 measurements/second?

73 de Nathaniel W2NAF

On Wed, Jul 24, 2019 at 3:54 PM Tom McDermott via TangerineSDR <
tangerinesdr at lists.tapr.org> wrote:

> The magnetometer spec has been updated as a result of the 7/22/2019
> TeamSpeak session.
>
> 1. Power supply is +5V only. I2C logic levels remain 3.3V.
> 2. Add new use case for direct connection to local host not involving Data
> Engine.
>
> Attached PDF.
>
> -- Tom, N5EG
>
>
> --
> TangerineSDR mailing list
> TangerineSDR at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/tangerinesdr_lists.tapr.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20190725/ba4df8be/attachment.html>