[nos-bbs] INP3 settings jnos

[Maiko Langelaar]

Hey Bob,

> Running with your original kludge for the moment.

IF you are running the latest 2.0j.4, then try the following :

    rsync -av www.langelaar.net::jnosX <jnos src directory>

Do a 'make', this will give you a new 'inp ifaces' command, example :

   inp ifaces ax0 xnet2 gus bob hull
   start inp

Do not configure INP3 ifaces to BPQ or traditional nodes. Perhaps
others who are well versed in Xnet/FlexNet/INP3 may want to chime
in on  this, it certainly could use some open discussion I think.

There are some other issues that I need to look at, but the above
technically replaces the kludge. Use it to configure those ifaces
on which you want to run INP3 on. You can run 'inp ifaces' anytime
you want with a new list, doing so replaces the previous list.

I've made note of ALL your observations, and I'll see if I can get
all of that resolved in the next while. Thanks for that.

Maiko