[nos-bbs] Jnos networking problem

[Miguel Bahi Cruz]

From: miguelbahi_cruz at hotmail.comTo: nos-bbs at tapr.orgSubject: RE: [nos-bbs] Jnos networking problemDate: Fri, 16 Aug 2013 17:36:27 +0200No, I was two lan cards, in diferent tests I was create a one ms loopback virtual lan in a windows host machine, and next, ubuntu looks ( trhu vmware ) , other lan card, and was create a eth1, later when I disable ms loopback adapter, eth0 dissapears, and only have in the system eth1.

Routes? no, I don't put any routes ( I suppose you are refering to activate routing service in ubuntu between two lan cards ).

I start trace of tun0, but ( remember,  I am a ubuntu and jnos newbie ), and do nothing.

examples: 

jnos>trace tun0 1211                
tun0: input output - no broadcasts (Hex/ASCII dump)

I make pings and connect to telnet session in other machine in the lan, and all works ok, but any trace.

jnos> trace tun0 1211 \home\mbahi\jnos2\logs\captun0.txt
tun0: input output - no broadcasts (Hex/ASCII dump) trace file: \home\mbahi\jnos2\logs\captun0.txt
jnos> 

The same thing, and the system don't create any file captun0.txt. where is my mistake?

jnos> trace
tun0: input output - no broadcasts (Hex/ASCII dump) trace file: \home\mbahi\jnos2\logs\captun0.txt
loopback: tracing off
encap: tracing off
jnos> 


Date: Fri, 16 Aug 2013 16:40:57 -0700
From: g7ltt at g7ltt.com
To: nos-bbs at tapr.org
Subject: Re: [nos-bbs] FW: Jnos networking problem

Erm ......
Eth1?
You got 2 network cards in there?
Have you added routes? Whats does the JNOS trace screen show you for tun0?
Mark


On Aug 16, 2013 11:52 AM, "Miguel Bahi Cruz" <miguelbahi_cruz at hotmail.com> wrote:






From: miguelbahi_cruz at hotmail.com
To: nos-bbs at tapr.org
Subject: RE: [nos-bbs] Jnos networking problem

Date: Fri, 16 Aug 2013 17:36:27 +0200




Mark, Gustavo, thanks for your suggestions.
Yes, the problem continues, tryng the arp command.
after publish the arp command the result is : 

arp -i eth1 -Ds 192.168.0.201 eth1 pub
root at eb5jequxserver:/etc# arp
Addres                HWtype   AddresHW         Indic Máscara         Interfaz192.168.0.61             ether   00:1f:16:9c:49:00   C                     eth1
Livebox                  ether   84:9c:a6:d1:4f:8d   C                     eth1192.168.0.201            *       <from_interface>    MP                    eth1
If the problem is the interface 201 don't have is own "virtual" mac, is possible create one?
note : .61 is my windows pc, livebox is the adsl router.


this is the result of ifconfig jnos command, for best diagnose of the problem.

jnos> ifconfigtun0     IP addr 192.168.0.201 MTU 1500 Link encap TUN         flags 0x0 trace 0x0 netmask 0x00000255 broadcast 0.0.0.0         sent: ip 18 tot 18 idle 0:00:04:13
         recv: ip 22 tot 22 idle 0:00:04:13loopback IP addr 127.0.0.1 MTU 65535 Link encap None         flags 0x0 trace 0x0 netmask 0xffffffff broadcast 255.255.255.255         sent: ip 0 tot 0 idle 0:00:14:39
         recv: ip 0 tot 0 idle 0:00:14:39encap    IP addr 44.44.44.44 MTU 1500 Link encap None         flags 0x0 trace 0x0 netmask 0xffffffff broadcast 255.255.255.255         sent: ip 0 tot 0 idle 0:00:14:39
         recv: ip 0 tot 0 idle 0:00:14:39
(44.44.44.44 ) is a "dummy " test ham ip addres.
73's


 		 	   		  
 		 	   		  
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20130829/113b7cdf/attachment.html>