[nos-bbs] attaching a remote TNC ?

[Bill V WA7NWP]

This thread on the Xastir list has the info needed:

  http://www.mail-archive.com/xastir@xastir.org/msg01772.html

Also on the Xastir faq, see the section on how to redirect serial ports:

  <http://www.xastir.org/wiki/Frequently_Asked_Questions#How_to_I_redirect_serial_ports_from_one_computer_to_another.3F>

On Mon, Feb 8, 2010 at 9:23 AM, Alan Sieg WB5RMG <wb5rmg at somenet.net> wrote:
> Forgive me if this has been asked too many times,
> I'm relatively new again to this list and haven't yet
> found all the all the right places to look for new answers . . .
>
> Has anyone come up with a way to make use of a shared TNC
> on a LAN connected computer (ie. AGWPE on an neighboring MS platform).
> Seems it might be possible to access that remote KISS device via sockets.
>
> It would be nice to have one TNC/radio on MS/AGWPE, that could also be
> used by the linux/JNOS2 BBS elsewhere on the LAN.
> Or perhaps better yet - have the TNC/radio on linux, sharing as does AGWPE.
>
> Certainly would help avoid multiple TNC/radio combinations
> on the same frequency.
>
>  Thanks  /;^)
> --
>  #  Alan Sieg, WB5RMG since 1976
>  #  http://wb5rmg.wordpress.com
>  #  http://www.linkedin.com/in/alansieg
>  #  wb5rmg(at)amsat(dot)org AMSAT#20554
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs
>