[hfsig] Problem with operation

[Bob Cutter]

 blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Try:
cd wsprrypi
Then 
sudo......
Bob KI0G 


Sent from Yahoo Mail for iPhone


On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:

 Received my wspr board and installed it in a Raspberry Pi 3B board(no problem here).Went through the latest install instructions in which everything seemed ok. I then typed this in:wspr  -r -o -s wd6dfh CN84ke 20 20m    enter and I get this message   can't open /dev/memThen it just stops. Did this not get installed when I set it up or does it have to be set up after the install? Am a rank noob when it comes to Linux. If I use the old way:sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m the screen locks up and the power to the Raspberry has to be removed to re-boot. Any help would be much appreciated. ThanksTodd  WD6DFH_______________________________________________
hfsig mailing list
hfsig at tapr.org
http://www.tapr.org/mailman/listinfo/hfsig



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/hfsig_lists.tapr.org/attachments/20170327/85991353/attachment.html>