[hfsig] Problem with operation

[Dennis Hall]

CD WsprryPi

On Mon, Mar 27, 2017 at 10:59 AM, Bob Cutter <ki0g at yahoo.com> wrote:

> Try:
>
> cd wsprrypi
>
> Then
>
> sudo......
>
> Bob KI0G
>
>
> Sent from Yahoo Mail for iPhone <https://yho.com/footer0>
>
> On Monday, March 27, 2017, 12:48 PM, todd <nexstar1 at hughes.net> wrote:
>
> *Received my wspr board and installed it in a Raspberry Pi 3B board(no
> problem here).*
> *Went through the latest install instructions in which everything seemed
> ok. *
> *I then typed this in:*
> *wspr  -r -o -s wd6dfh CN84ke 20 20m    enter*
>
> *and I get this message   can't open /dev/mem*
> *Then it just stops. Did this not get installed when I set it up or does
> it have to be set up after the install? Am a rank noob when it comes to
> Linux.*
>
> *If I use the old way:*
> *sudo ./wspr -r -o -s wd6dfh CN84ke 20 20m*
>
> *the screen locks up and the power to the Raspberry has to be removed to
> re-boot.*
>
> *Any help would be much appreciated.*
>
> *Thanks*
> *Todd  WD6DFH*
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
>
> _______________________________________________
> hfsig mailing list
> hfsig at tapr.org
> http://www.tapr.org/mailman/listinfo/hfsig
>
>


-- 
http://rathdrumweather.us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/hfsig_lists.tapr.org/attachments/20170327/13bb2b33/attachment.html>