[aprssig] Help with Digi settings

[Tyler Griffiths]

Try this...

If KPC-3 ver 8.2 rel 7265 only: ON WIDE1-1,WIDE4-4,WIDE3-3,WIDE3-2

If KPC-3Plus: ON WIDE4-4,WIDE5-5,WIDE6-6

Tyler Griffiths
N7UWX

See where I am:
http://map.findu.com/n7uwx-12

On Wed, Mar 2, 2016 at 1:49 PM, John via aprssig <aprssig at tapr.org> wrote:

> Hi,
>
> I'm having a problem with a high digi using a KPC3+ ver 8.3 that doesn't
> want to digi any signal with wide1-1 as the first part of a path. It will
> digi the signal only if it was digied by another low level wide1-1 digi.
> I've tried a few suggestion as supplied by several people with no avail. It
> would be laborious to do a DISP over the air on it, so I'm getting ready to
> do a site visit with a replacement KPC-3+ ver 8.3. Here is the DISP from
> the new TNC.
> Do I have it setup correctly.
> Thanks for any suggestions
>
> John
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20160302/0084ff2b/attachment.html>