[aprssig] Argent arduino shield

[Andrew Rich]

Scott,

Do you think it is better to UART the shield or soft serial it?

I have a GPS in the development area of the shield. 

My aim is to to parse $GPRMC and launch that using the shield

Andrew

-----------------------------
Sent from my iPhone
Andrew Rich
vk4tec at tech-software.net
www.tech-software.net
0419 738 223

> On 14 Jun 2016, at 02:24, Scott Miller via aprssig <aprssig at tapr.org> wrote:
> 
> Yes, it will transmit and receive.  The RX side is a little picky about signal levels and doesn't have much filtering, so try to give it a clean signal.
> 
> Scott
> N1VG
> 
>> On 6/12/2016 12:24 PM, Andrew rich via aprssig wrote:
>> Can the argent arduino shield tx and rx ?
>>  
>> I see code to tx and rx but can it do it like a tnc ?
>>  
>> i guess u could spend most of your time rx unless a tx event is needed ?
>>  
>> plan to use the uart on an arduino to talk to shield
>>  
>> software serial gps
>>  
>> Mr Andrew Rich
>> vk4tec at tech-software.net
>> vk4tec at internode.on.net
>> http://www.tech-software.net
>> 0419 738 223
>>  
>> 
>> 
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20160614/e54df86f/attachment.html>