[aprssig] X-BEE wireless modules?

[Mike George]

Bob:

There are 2 PWM outputs.  One is normally RSSI but can be reconfigured.
I've only used the serial mode myself but have seen demos performing
what you describe.  The analog channels are 10 bit and you can configure
the sample rate.

Mike, N3MUY

On 8/28/2015 18:31, Robert Bruninga via aprssig wrote:
>
> Does anyone have experience with the X-BEE wireless modules?
>
> I see they are trivial for sending serial data back and forth, but 
> they also mention that they have several ANALOG pins and several I/O pins.
>
> Is there a mode where the INPUT analog voltages on the A/D pins on one 
> module just appear as OUTPUT analog voltages out on the identical A/D 
> pins of the other module?  In other words, a wirelss transfer of 
> several analog voltages transparently?
>
> Bob, WB4aPR
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20150828/07b18c8c/attachment.html>