[aprssig] X-BEE wireless modules?

[Greg Clark]

http://examples.digi.com/sensors/802-15-4-analog-input-with-a-potentiometer/

Greg K7RKT

On Fri, Aug 28, 2015 at 5:04 PM, Mike George via aprssig <aprssig at tapr.org>
wrote:

> Bob:
>
> There are 2 PWM outputs.  One is normally RSSI but can be reconfigured.
> I've only used the serial mode myself but have seen demos performing
> what you describe.  The analog channels are 10 bit and you can configure
> the sample rate.
>
> Mike, N3MUY
>
>
> On 8/28/2015 18:31, Robert Bruninga via aprssig wrote:
>
> Does anyone have experience with the X-BEE wireless modules?
>
>
>
> I see they are trivial for sending serial data back and forth, but they
> also mention that they have several ANALOG pins and several I/O pins.
>
>
>
> Is there a mode where the INPUT analog voltages on the A/D pins on one
> module just appear as OUTPUT analog voltages out on the identical A/D pins
> of the other module?  In other words, a wirelss transfer of several analog
> voltages transparently?
>
>
>
> Bob, WB4aPR
>
>
> _______________________________________________
> aprssig mailing listaprssig at tapr.orghttp://www.tapr.org/mailman/listinfo/aprssig
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20150828/5c5c56ea/attachment.html>