[aprssig] Best format for a Repeater Item (Better!)

[Bryan Hoyer]

Understood.

I'll go back to using freq as item name and add PHG. I'll stick with web site for last line as the meetings move around in time and place and I'd hate to aprs someone to nowhere.

Thanks,
Bryan

On Apr 24, 2013, at 2:09 PM, Robert Bruninga <bruninga at usna.edu> wrote:

>> after reading and digesting, looks like
> 
> )N7JN-V1!4833.53N/12307.05Wr 145.250MHz T131 R25m
> 
>> is the way to go.
> 
> But it fails the most valuable reason for these objects.  That is when"
> N7JN-V1" pops up on an APRS radio front panel, few people other than the
> owner of that repeater (and certainly not any visitors for which this
> powerful capability was designed) knows what N7JN-V1 is.  Neither can it
> be sorted to locate all frequency items.
> 
> The value of having the FREQ be the object name and using the proper
> format are manifold:
> 
> 1) The FREQ is highly visible on APRS radios when it flashes for 10
> seconds on receipt
> 2) It is stored in the Station List as the Frequency so it is trivial to
> find from the LIST button
> 3) ALL such frequency objects can be found instantly in the 100-deep list
> by pressing the SORT button by CALLSIGN.  This puts all these freuqncy
> objects at the top of the list for trivial TUNING using the TUNE or QSY
> button.
> 4) On APRS maps the FREQS stand out and are not just another callsign
> requiring a CLICK to see the frequency
> 5) The weekly NET times are indicated
> 6) The montly meeting dates are included
> 7) Nobody cares what the callsign of a repeater is
> 
> The proper format I'd suggest is:
> 
> )145.25sji!4833.53N/12307.05WrPHGxxx T131 R25m Net Tu 7pm mtg3rdT
> 
> This has all the fetures intented for this APRS functionality noted above.
> Monitor the OBJECT using a D7 HT and you should see this display:
> 
>> 145.25sji
>> T131 R25m
>> Net Tu 7pm
>> Mtg3rdT
> 
> The last line does not show up on a D7's dual 20 byte display but it does
> show up on the D700 displays which do 28 bytes.  Also, then on the other
> D7 display it shows the Power, Antenna Height, Gain and directivity too
> (from the PHG data).  All of this is very valuable compared to just seeing
> another callsign object.
> 
> Bob, WB4aPR
> 
> 
> On Apr 24, 2013, at 1:03 PM, Robert Bruninga <bruninga at usna.edu> wrote:
> 
>>> I'm currently sending the same as another repeater in my area.
>>> Is there a standard item format for a repeater?
>> 
>> )145.250!4833.53N/12307.05Wr/A=000840t131.8 N7JN
>> 
>> There sure is, and that, unfortunately, is not it.  See
>> http://aprs.org/localinfo.html
>> 
>> The format above  does not include PHG so that the repeaters range can
>> be automatically plotted, and the TONE is not in the correct location
>> nor format so that APRS radios can automatically set it.  Nor does it
>> contain a text version of the range, nor the weekly net times, nor the
>> monthly club meeting dates.  All of these can fit in the standardized
>> 28 byte format.
>> 
>> Hope that helps.
>> Bob, WB4APR
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig