[aprssig] KPC2 like a fill in digi

[Eduardo Gomez Lopez]

Thank you so much, this is a grate answer, lol, in this case is more
"smart" the tinytrak4 because it has alias substitution? But only
works like a fill in digi right? Never like a wide digi. I'm in the
correct way?

Thanks a lot

HK6PQI


Eduardo Gómez L.
Editor conceptual de entretenimiento
Caracol Televisión

El 27/03/2012, a las 12:04 p.m., Tom Hayward <esarfl at gmail.com> escribió:

> For aprs.fi to accurately determine the path of a packet, each
> digipeater must support callsign substitution. When you use the UIDIGI
> command found in more sophisticated digipeater software, the
> digipeater callsign is inserted into the path when it digipeats the
> packet.
>
> If your TNC supports UIDIGI, you would program it like this:
> UIDIGI ON WIDE1-1
>
> And then it would mark packets like this:
> in: KD7LXL>APRS,WIDE1-1:
> out: KD7LXL>APRS,5K3PRS-3,WIDE1*:
>
> The KPC2 does not have the UIDIGI command. The alternative is to use
> the MYALIAS command instead. When the above packet is digipeated with
> the MYALIAS function, it will look like this:
>
> KD7LXL>APRS,WIDE1-1*:
>
> Your KPC2 does not leave any information that 5K3PRS-3 digipeated the
> packet! aprs.fi does not know who digipeated the packet, so it does
> not draw a line.
>
>
> Tom KD7LXL
>
> On Tue, Mar 27, 2012 at 09:51, Eduardo Gomez Lopez <edogl78 at gmail.com> wrote:
>> Yes, my digi is configured like that:
>>
>> Mycall 5K3PRS-3 (is the unique)
>> Myalias WIDE1-1
>> Digi on
>> Btext !0000.00N/00000.00W#W1-1 APRS HK (with the correct location)
>> Beacon every 30
>> Unproto APNK80 (like kantronics kam 8.0) without via
>>
>> What setup I need more?
>>
>>
>> Eduardo Gómez L.
>> Editor conceptual de entretenimiento
>> Caracol Televisión
>>
>> El 27/03/2012, a las 10:46 a.m., Lawrence LaBranche
>> <Capdiamont at yahoo.com> escribió:
>>
>>> Did you use different SSID on all your devices? Is your digi sending a position report?
>>>
>>> KI6ZQY
>>>
>>> Sent from my iPod
>>>
>>> On Mar 27, 2012, at 8:36 AM, Eduardo Gomez Lopez <edogl78 at gmail.com> wrote:
>>>
>>>> Hi, I have some problem with a KPC2 TNC because I want to put it as a
>>>> fill in digi WIDE1-1. It is working very well but in APRS.fi does not
>>>> "draw" the Path that this digi is retransmitting.
>>>>
>>>> In APRS.fi shows like my car send the frame direct to the igate, not
>>>> through the digi. Why happen that? Can i do something to exist in the
>>>> graphics? Right now my digi is like a ghost
>>>>
>>>> Sorry about my English. Speak Spanish
>>>>
>>>>
>>>> Eduardo Gómez L.
>>>> Editor conceptual de entretenimiento
>>>> Caracol Televisión
>>>> HK6PQI
>>>>
>>>> _______________________________________________
>>>> aprssig mailing list
>>>> aprssig at tapr.org
>>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at tapr.org
>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig