[aprssig] Need some help with 30m igate

Andrew Rich vk4tec at tech-software.net
Fri Aug 3 19:31:50 EDT 2012


Does xmitok take affect in kiss mode ? 

Sent from my iPhone
Andrew Rich

On 04/08/2012, at 9:28, "Andrew P. " <andrewemt at hotmail.com> wrote:

> Matthew,
> 
> Maybe you need to set the port to HF every time, just like you set the TNC to KISS mode every time? Forget about having the TNC remember its mode and just fully configure it every time.
> 
> Just my $.02.
> 
> Andrew Pavlin, KA2DDO
> ------Original Message------
> From: Matthew Willis
> To: aprssig at tapr.org
> Sent: Aug 3, 2012 7:20 PM
> Subject: Re: [aprssig] Need some help with 30m igate
> 
> 
> ...and now even more fun
> 
> After putting the KAM+ into PORT HF before INT KISS, I actually saw a
> packet from Kentucky surrounded by KISS-y binary goodness.  I thought
> that perhaps was the ticket.
> 
> However, I seemed to be losing settings after powering off the TNC and
> disconnecting it from 12VDC, so I replaced the CR2032 battery.  Best
> of intentions.
> 
> Now, no matter what I do I can't get the HF port to transmit anymore.
> This is a bug in aprx I'm almost certain, as the debug output is
> showing me "kiss-encoded: c0 00 a8", and the center byte being 00
> means "command on device 0" right?
> 
> Anyway, it's amazingly frustrating at the moment.
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> Sent from my Verizon Wireless BlackBerry
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig




More information about the aprssig mailing list