[aprssig] Need some help with 30m igate
andrewemt at hotmail.com
Fri Aug 3 19:28:28 EDT 2012
Maybe you need to set the port to HF every time, just like you set the TNC to KISS mode every time? Forget about having the TNC remember its mode and just fully configure it every time.
Just my $.02.
Andrew Pavlin, KA2DDO
From: Matthew Willis
To: aprssig at tapr.org
Sent: Aug 3, 2012 7:20 PM
Subject: Re: [aprssig] Need some help with 30m igate
...and now even more fun
After putting the KAM+ into PORT HF before INT KISS, I actually saw a
packet from Kentucky surrounded by KISS-y binary goodness. I thought
that perhaps was the ticket.
However, I seemed to be losing settings after powering off the TNC and
disconnecting it from 12VDC, so I replaced the CR2032 battery. Best
Now, no matter what I do I can't get the HF port to transmit anymore.
This is a bug in aprx I'm almost certain, as the debug output is
showing me "kiss-encoded: c0 00 a8", and the center byte being 00
means "command on device 0" right?
Anyway, it's amazingly frustrating at the moment.
aprssig mailing list
aprssig at tapr.org
Sent from my Verizon Wireless BlackBerry
More information about the aprssig