[aprssig] APRN news from Dayton!

[Scott Miller]

I never noticed that!  I'll have to try adding the PD modes when I get a 
chance.

Scott
N1VG

On 5/25/2011 5:47 PM, Stephen H. Smith wrote:
> On 5/25/2011 1:35 PM, Scott Miller wrote:
>>
>> What do you use for PD160 decoding? I didn't see that on MMSSTV or MixW.
>>
>
> mmSSTV has a large number of "hidden" modes. In either the RX or TX
> panel, right -click any of the mode buttons. You will see a huge list of
> modes, along with their resolution and transmission time, that can be
> assigned to any of the buttons in place of the default one. The
> greyed-out entries in the list are ones currently assigned to a visible
> button. Even if the mode doesn't show on a button, the receive side will
> automatically receive ANY of them. Assuming of course you haven't
> enabled single mode receive by clicking a button other than "AUTO"
>
> [I have one of the TX mode buttons set to MP73-N for 30 meter use, and
> one set to PD160 for "HD" (640x480 full VGA) mode on 20 & 40 meters.]
>
> MixW, as of Ver 2.20, supports the MPxx-N narrowband modes, but doesn't
> support any of the modes with image size higher than the standard 320x240.
>
>
> -------------------------------------------------------------------------------
>
>
> --
>
> Stephen H. Smith wa8lmf (at) aol.com
> EchoLink Node: WA8LMF or 14400 [Think bottom of the 2M band]
> Skype: WA8LMF
> Home Page: http://wa8lmf.net
>
> ===== Vista & Win7 Install Issues for UI-View and Precision Mapping =====
> http://wa8lmf.net/aprs/UIview_Notes.htm#VistaWin7
>
> *** HF APRS over PSK63 ***
> http://wa8lmf.net/APRS_PSK63/index.htm
>
> "APRS 101" Explanation of APRS Path Selection & Digipeating
> http://wa8lmf.net/DigiPaths
>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>