[aprssig] APRN news from Dayton!

[Stephen H. Smith]

On 5/25/2011 1:35 PM, Scott Miller wrote:
>
> What do you use for PD160 decoding?  I didn't see that on MMSSTV or MixW.
>

mmSSTV has a large number of "hidden" modes.    In either the RX or TX panel, 
right -click any of the mode buttons.  You will see a huge list of modes, along 
with their resolution and transmission time, that can be assigned to any of the 
buttons in place of the default one.  The greyed-out entries in the list are 
ones currently assigned to a visible button.    Even if the mode doesn't show 
on a button, the receive side will automatically receive ANY of them.   
Assuming of course you haven't enabled single mode receive by clicking a button 
other than "AUTO"

[I have one of the TX mode buttons set to MP73-N for 30 meter use, and one set 
to PD160 for "HD"  (640x480 full VGA) mode on 20 & 40 meters.]

MixW, as of Ver 2.20, supports the MPxx-N narrowband modes, but doesn't support 
any of the modes with image size higher than the standard 320x240.


-------------------------------------------------------------------------------

--

Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      WA8LMF  or 14400    [Think bottom of the 2M band]
Skype:        WA8LMF
Home Page:          http://wa8lmf.net

=====  Vista & Win7 Install Issues for UI-View and Precision Mapping =====
     http://wa8lmf.net/aprs/UIview_Notes.htm#VistaWin7

*** HF APRS over PSK63 ***
    http://wa8lmf.net/APRS_PSK63/index.htm

"APRS 101"  Explanation of APRS Path Selection & Digipeating
   http://wa8lmf.net/DigiPaths