[aprssig] recommendations for 9600 TNC

Andre v Schaijk aprs at pe1rdw.demon.nl
Fri May 6 13:58:34 EDT 2011


Op 6-5-2011 16:07, ml41782 schreef:
> I'm looking at my options for expanding APRS using 9600 baud in my 
> area. I have been testing with 9600 on UHF for some time now with fair 
> to good success. I actually prefer UHF. I'm getting ready to test this 
> now on the VHF side. I have the VHF radios  what I'm looking for is a 
> cheaper way to do the TNC other than a KPC 9612.
>
> I was so hoping over the past year that argent data systems and or 
> Byonics would have come out with a TNC that would both tx and rx at 9600.
>
> I'm plannning on doing this right along side of my other Digi's and 
> use a set of cans at each location to allow both 1200 (144.390 ) / 
> 9600 ( 145.010 )  to work
>
>
> Any thoughts ?
>
If you are not afriad to order from europe I would sugest looking into a 
tnc7 multi
http://nt-g.de/de/tnc7multi/tnc7multi.php5
this has the added bonus of having a USB port, very handy for laptops 
having no or only one com port.

73 Andre PE1RDW
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20110506/2233aa45/attachment.html>


More information about the aprssig mailing list