[aprssig] D72 TXD delay TX test

[Mark Cheavens]

The "extra" tx delay is not cumulative unless the TX delay is on each station.
Example(Yours) has an extra 300ms, but each of the digi's only have 
5ms, the 27 hops are (27 x 5) + 300

BUT,
I do believe long term if we did "compressed bunching" we could save 
a LOT of time!!!!!

Couple this with digi's that only transmit based upon DISTANCE / 
change in information and available bandwidth, and then 
"bunch/compress" all the output into one burst would be much more efficient..

Mark Cheavens
KC5EVE

At 04:19 PM 12/7/2010, you wrote:
>Hallelujah!!!
>
>It's bad enough that the average appliance operator never set's his 
>TXD, but the digi owners sure should. Think about it this way.... I 
>tx a packet with a bad TXD.  Let's say it costs an extra 300ms.  Now 
>my packet goes out 3 hops, potentially hitting 27 digipeaters (yeah, 
>it's a worst/best case).  300ms x 27 is 8.1 seconds of on air time 
>wasted just with the digipeaters.  It may not sound like much, but 
>think how many times your local digipeater TX's every day.
>
>Is it time to start talking about queueing packets for 10 or 20 
>seconds again??? <ducking>  Seriously, it can be done with a simple 
>timer on the ext-CD input.  You just hold that input active for 
>10/20 seconds and let it drop for one second.  Rinse Lather 
>Repeat.  The digi then uses ONE txdelay to transmit several 
>packets.  It's a good time saver if we can live with the bunching effect.
>
>Wes
>---
>God help those who do not help themselves.
>
>
>On Tue, Dec 7, 2010 at 16:43, Robert Bruninga 
><<mailto:bruninga at usna.edu>bruninga at usna.edu> wrote:
> >> I'm interested to know how much of the capacity
> >> of the 9k6 is taken up with message content
> >> and how much with TxDelay's?
>
>On a tangential item, the new TH-D72 HT defaults to 200ms at
>1200 baud and Kenwood did not recommend going shorter.  It has
>settings for 150 and 100 ms..  Lemme do a test.  Hold on.
>
>Here is what I got Transmitting from D72 to an old D700 with
>external KPC-9612:
>
>1200 baud to KPC-9612 *not* 100% at 150 ms and below
>1200 baud to D700 internal  100% at 100ms
>9600 baud to KPC-9612 got   100% at 100 ms
>9600 baud to D700 internal  100% at 100ms
>
>Test was HT in basement on 0.05 watts through industrial
>building to sat antenna on roof.   More testing with other
>combinatinos would be warranted, including how fast the D72 can
>receive.
>
>TOO MANY APRS DIGIS have absurd 300 and 500 ms delays!
>
>Bob, Wb4APR
>
>
>_______________________________________________
>aprssig mailing list
><mailto:aprssig at tapr.org>aprssig at tapr.org
>https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20101207/29abec1e/attachment.html>