[aprssig] TNC's for LINUX computers

[Bill V WA7NWP]

Running tecplot/IP over packet gives you access to regular tools like telnet
or SSH - if that's what you're asking..
Bill

On Dec 27, 2009 5:00 PM, "Andrew Rich" <vk4tec at tech-software.net> wrote:

 If I were to hook up a TNC to a com port on a LINUX server, and then use
the
connected light on the TNC to pass messages to the LINUX server over air,
could I use the TNC setup to access a command prompt on a remote server ?

Although 1200 baud Packet is slow, it makes for an easy wireless solution to

LINUX command line opeartions

Andrew VK4TEC

Anyone done this ?



_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20091227/7779489f/attachment.html>