[aprssig] Building a new digi

Stephen H. Smith wa8lmf2 at aol.com
Wed Apr 1 21:08:48 EDT 2009

Keith VE7GDH wrote:
> I did one test some weeks ago with a
> T2-135 side-by-side with a KPC-3+ and the T2-135 didn't perform too
> badly, but the Kantronics TNC did seem to decode more packets. The
> antennas had different characteristics, so I swapped them around and
> the Kantronics TNC still came out ahead. 

Could you disable transmit and then feed both radios from a single 

I have a modified Channel Master 1-to-2 coax splitter originally used to 
feed two TVs from one antenna. I replaced the F connectors with BNC 
connectors so I could use various RG-58 coax cable jumpers with BNC 
connectors with adapters to connect two radios at once for comparative 

 Although the device is claimed to be  75-ohms in and two 75-ohms out, 
actually it just reflects the input impedance to two like outputs, and 
works just as well 50 in / 50 out.   The device is rated for 50-950 MHz 
(i.e. all of the classic VHF and UHF TV freqs and everything in between. 



Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      WA8LMF  or 14400    [Think bottom of the 2M band]
Skype:     WA8LMF
Home Page:          http://wa8lmf.com  --OR--   http://wa8lmf.net

World Digipeater Map

JavAPRS Filter Port 14580 Guide

"APRS 101"  Explanation of APRS Path Selection & Digipeating

Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:

More information about the aprssig mailing list