[aprssig] TM-D700 w/RC-D710

[Phil - AD6NH]

Your findings are correct.  That is one of the reasons why the RC-D710 is
already being discontinued and heavily discounted at stores.  A combination
of poor marketing and what ended up being a pretty limited accessory.

73
Phil - AD6NH
www.aprsca.net
www.aprs2.net

On Tue, Jul 22, 2008 at 8:06 AM, Arte Booten <n2zrc at optonline.net> wrote:

> Hi all,
>
>     Am I correct in saying that the RC-D710 acts only as a  TNC and
> packet/APRS
> display when used with any radio other than the TM-V71?  That is, if I
> wanted to
> use it with my TM-D700,  I'd still need to use that radio's control head
> as well
> as the RC-D710?
>
>     From what I've gleaned from the RC-D710's manual,  this is the case
> ... but
> it doesn't  seem particularly clear about it.   Too bad Kenwood won't
> update the
> '700's firmware ... even with a trip to the service
> center.                   73
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20080722/8c3ca153/attachment.html>