[aprssig] TM-D710 APRS symbol (also posted on theyahooV71/D710group)

Kai Gunter Brandt kai.brandt at hjemme.no
Mon Jul 14 13:03:11 EDT 2008

Robert Bruninga skrev:
> D710 tuning:
> Yes, the D710 will tune to either the OBJECT NAME frequency or
> to the frequency included in someone's position text.  If there
> is one in both, then the OBJECT NAME is considered the repeater
> output freq and the frequency in the position text is considerd
> as a non-standard input frequency. (not sure if this complexity
> is yet implemented)... 

This does not work 100%.

;145.750-B*111111z6018.95N/00506.55ErC097 LA7BR
This tunes to 145.750 but the repeater split is not activated even if 
the radio setup is using "auto repeater offset on"

;145.750-B*111111z6018.95N/00506.55Er145.150MHz C097 LA7BR
This tunes to 145.150 and xmit on 144.550

;145.750-B*111111z6018.95N/00506.55ErC097 -0600Hz LA7BR
This tunes to 145.750 and xmit on 145.150 and this is correct.

So we need to keep Kenwood working with a new firmware :o)

Kai Gunter

More information about the aprssig mailing list