[aprssig] Has anyone else seen this?

[John Habbinga]

This doesn't sound like a transmitting problem.  It sounds like the receiver 
has a battery save feature enabled.  Turn off the battery save feature and 
it should decode the first time, everytime.

> When I press the Beacon button the beacon is sent immediately with no 
> TXD, and the beacon is not able to be decoded (I suspect because it is 
> being truncated). If I immediately press the button again the beacon  is 
> sent a second time with the proper TXD. I can press the Beacon  button as 
> many times as I like and the proper TXD is imposed. If I  stop pressing 
> the Beacon button and wait for several minutes, then  press it again the 
> problem repeats itself. It is only the first beacon  after a period of 
> inactivity that is truncated.