[aprssig] DIN Connectors

[Charles Whicker]

Sorry Fred, I have never ordered anything except parts, plugs, etc..

Charlie

Fred Atkinson, WB4AEJ wrote:

>>Fred, I would look at www.packetradio.com  (or buxcomm.com). Most
>>anything you need, no minimums, good prices and service.
>>
>>73,
>>
>>Charlie
>>    
>>
>
>Charlie,
>
>    I tried ordering a ready made cable from them.  I found the cable
>listings are somewhat cryptic.  I called them and asked for help.  They told
>me to email technical suport.  I got this 'he wasn't going to advise me
>because of a lawsuit thing, been there done that' email back from tech
>support.  Bad enough that they are playing this game but why would they tell
>me to email for help if they are not goiing to give it?
>
>    Consequently, I'm a little apprehensive of doing business with those
>folks.
>
>    I'm pasting a copy of the correspondence below.
>
>    73,
>
>
>
>
>Fred, WB4AEJ
>
>
>----- Original Message ----- 
>From: <k4abt at packetradio.com>
>To: <fred at wb4aej.com>
>Cc: "CORPresident Ms Mata" <jan at packetradio.com>; <j.mata13 at yahoo.com>;
>"ATTY-Corp Counsel" <jay at packetradio.com>
>Sent: Tuesday, February 28, 2006 1:45 PM
>Subject: RE: Custom TNC Cable
>
>
>  
>
>>Sorry, but we are unable to choose for you... Read the LAWsuit
>>Disclaimer at the top of the page....
>>
>>Been thar, done that, did not get a t shirt, but we got sue'd
>>because the customer gave us the wrong model, and when we sent the
>>radio cable for the radio he said he had.... we had to buy a new
>>radio...
>>
>>SO NOT ANY MORE, not even if we have to cease building the cables.
>>
>>WE TEST ALL CABLES ON THE SPECIFIC RADIO & TNC that IT APPLIES TO.
>>
>>http://www.packetradio.com/wiring.htm
>>
>>TNX de BUX COMM
>>Tell your frriends: You found it at:
>>www.BUXCOMM.com
>>
>>TNC to Radio interface Cables
>>http://www.packetradio.com/wiring.htm
>>
>>RASCAL GLX to Radio soundcard Interfaces:
>>http://www.packetradio.com/RCBL.htm
>>
>>-----Original Message-----
>>From: Fred Atkinson [mailto:fred at wb4aej.com]
>>Sent: Tuesday, February 28, 2006 12:27 PM
>>To: support at packetradio.com
>>Subject: Custom TNC Cable
>>
>>     I have an MFJ-1270B, a Kenwood TR-7850, and a Kenwood
>>TM-211A.
>>
>>     Which two TNC cables would I need to be sure that I can use
>>my TNC on either one of them?
>>
>>     Please let me know.  I need to get the correct cable(s) on
>>the way.
>>
>>     Regards,
>>
>>
>>
>>                                        Fred Atkinson
>>    
>>
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>  
>