[aprssig] Pm maps 3.5, winaprs ?

[Chris Rose]

Brian,
2.7.6 won't work either for some reason.  Looking at
my previous post, do you have any other pointers for
me?  Maybe I missed something with the 2.7.6 release. 
Maybe where I put the 2.7.6 as you point out.  I will
try that and see what happens.

Chris 
KB8UIH

> At 09:17 AM 5/16/2005, you wrote:
> >Chris,
> If you look at the Winaprs TAPR download
> site, there is a special 
> > version
> >of Winapars with the new features but works with
> the old PMaps version. I
> >think it is version 2.7.6, the nice thing is this
> version eliminates the
> >mic-E conversion problem if you are gating any RF
> traffic to the internet.
> >This version also has the Tiger map server features
> if you want to try them.
> >If you already have version 2.5.1 running, you just
> need to put a copy of
> >the new executable in the same directory and run
> it. You don't need to kill
> >your old version. There is a minor bug, for each
> PMap window you have open
> >you will have an additional button on your taskbar.
> It does not seem to
> >bother anything other than take up space on the
> taskbar.
> >Brian, N2KGC

> >-----Original Message-----
> >From: Chris Rose [mailto:kb8uih at sbcglobal.net]
> >Sent: Sunday, May 15, 2005 10:33 PM
> >To: TAPR APRS Mailing List
> >Subject: Re: [aprssig] Pm maps 3.5, winaprs ?
> >
> >
> >Hello Mark,
> >
> >This is an old thread from January or so.
> >
> >I have done the installation of pmapOCX and made
> sure
> >the correct drive letter is showing to read the CD.
> >With the newer versions of WinAPRS I lose street
> level
> >images.
> >
> >Now, I have not installed the PM to my hard drive
> >since it did work before with WinAPRS without
> >installation or copying any files to the hard
> drive.
> >
> >I went back to 2.5.1 in order to keep my old PM 3.5
> in
> >use.
> >
> >If your post is in regard to the newest version of
> >PMAP then I am still out of luck because I haven't
> >shelled out the $50? to buy the new version(s).
> >
> >If you can elaborate any further or reiterate any
> >further, I would appreciate clearing up the mud.
> >
> >Thanks,
> >Chris Rose
> >KB8UIH
> >
> >--- Mark Sproul <kb2ici at amsat.org> wrote:
> > > In order to run any version of Pmap with
> WinAPRS,
> > > you do have to
> > > install the pmap OCX. There are 2 different
> versions
> > > and the latest
> > > is on www.winaprs.org
> > >
> > > If it is not working on the street level, you
> have
> > > to either copy the
> > > files to the C drive or configure WinAPRS for
> the
> > > correct CD-ROM
> > > drive letter. This is done from the PMAP
> settings
> > > dialog accessed
> > > from one of the buttons on the right edge of the
> > > PMAP screen.
> > >
> > >
> > > Mark
> >
> >
> >_______________________________________________
> >aprssig mailing list
> >aprssig at lists.tapr.org
>
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> >
> >
> >
> >_______________________________________________
> >aprssig mailing list
> >aprssig at lists.tapr.org
>
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>