[aprssig] Pm maps 3.5, winaprs ?

[John Price]

I have been having a problem getting it to go to street level. 2.5.1 works 
just fine. Has this been fixed? 73's << John

At 09:17 AM 5/16/2005, you wrote:
>Chris,
>         If you look at the Winaprs TAPR download site, there is a special 
> version
>of Winapars with the new features but works with the old PMaps version. I
>think it is version 2.7.6, the nice thing is this version eliminates the
>mic-E conversion problem if you are gating any RF traffic to the internet.
>This version also has the Tiger map server features if you want to try them.
>If you already have version 2.5.1 running, you just need to put a copy of
>the new executable in the same directory and run it. You don't need to kill
>your old version. There is a minor bug, for each PMap window you have open
>you will have an additional button on your taskbar. It does not seem to
>bother anything other than take up space on the taskbar.
>
>
>
>Brian, N2KGC
>
>
>-----Original Message-----
>From: Chris Rose [mailto:kb8uih at sbcglobal.net]
>Sent: Sunday, May 15, 2005 10:33 PM
>To: TAPR APRS Mailing List
>Subject: Re: [aprssig] Pm maps 3.5, winaprs ?
>
>
>Hello Mark,
>
>This is an old thread from January or so.
>
>I have done the installation of pmapOCX and made sure
>the correct drive letter is showing to read the CD.
>With the newer versions of WinAPRS I lose street level
>images.
>
>Now, I have not installed the PM to my hard drive
>since it did work before with WinAPRS without
>installation or copying any files to the hard drive.
>
>I went back to 2.5.1 in order to keep my old PM 3.5 in
>use.
>
>If your post is in regard to the newest version of
>PMAP then I am still out of luck because I haven't
>shelled out the $50? to buy the new version(s).
>
>If you can elaborate any further or reiterate any
>further, I would appreciate clearing up the mud.
>
>Thanks,
>Chris Rose
>KB8UIH
>
>--- Mark Sproul <kb2ici at amsat.org> wrote:
> > In order to run any version of Pmap with WinAPRS,
> > you do have to
> > install the pmap OCX. There are 2 different versions
> > and the latest
> > is on www.winaprs.org
> >
> > If it is not working on the street level, you have
> > to either copy the
> > files to the C drive or configure WinAPRS for the
> > correct CD-ROM
> > drive letter. This is done from the PMAP settings
> > dialog accessed
> > from one of the buttons on the right edge of the
> > PMAP screen.
> >
> >
> > Mark
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig