[aprssig] UIDIGI Settings for New n-N

[Tim Cunningham]

UIDWAIT does have an equivalent or something close to it. Not
exactly, but good enough.
.
UIDWAIT=0 can closely be achieved on a UIDIGI system with the
following commands:

PPersistence=255
SlotTime=1

It is the best you can do to get the digi to seize the channel with a 
UIDIGI.

The UIDIGI settings website has been updated to reflect the latest
Paradigm changes at

http://www.qsl.net/n8deu/uidigi_eprom_settings.htm





73's

Tim - N8DEU
Huntsville, Alabama



----- Original Message ----- 
From: "Greg Noneman" <greg at clubnet.net>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Thursday, January 13, 2005 1:21 AM
Subject: [aprssig] UIDIGI Settings for New n-N


On Jan 12, 2005, at 5:50 AM, Robert Bruninga wrote:

> Thanks greg.  Perfect!
> Yes, I will need the UIDIGI-ROM settings as well.
> This is exciting...
> Bob

Bob,

Here are the translations from the KPC-3 commands to UIDIGI-ROM.  The
full commands are listed, with the capitalized letters being the
abbreviated version.

--------------------
HID >>
N/A. No equivalent

CD >>
N/A. No equivalent

UIDWAIT >>
N/A. No equivalent

UIFLOOD with NOID >>
UIFLDfl 0 (Setting to 0 disables ID after last WIDEn-N digied)

BLT 1 EVERY 00:20:00 START 00:00:00 >>
BEacon 1 1200 and
BEACONOffset 1 0

BLT 2 EVERY 00:40:00 START 00:10:00 >>
BEacon 2 2400 and
BEACONOffset 2 600

BLT 3 EVERY 01:20:00 START 00:30:00 >>
BEacon 3 4800 and
BEACONOffset 3 1800

BLT 4 >> N/A. Only 3 beacons provided.

LTP 1 APN83 >>
Bdl 1 (blank) and
UNproto APNU19 (assuming version 1.9)

LTP 2 APN383 VIA WIDE >>
Bdl 2 WIDE

LTP 3 APN83 VIA WIDE2-2 >>
Bdl 3 WIDE2-2

LTP 4 >> N/A. Only 3 beacons provided.

LT 1 !DDMM.hhNLDDDMM.hhW#…… >>
BText 1 !DDMM.hhNLDDDMM.hhW#…..

LT 2 !DDMM.hhNLDDDMM.hhW#….. >>
BText 2 !DDMM.hhNLDDDMM.hhW#…..

LT 3 !DDMM.hhNLDDDMM.hhW#….. >>
BText 3 !DDMM.hhNLDDDMM.hhW#…..

LT 4 >> N/A. Only 3 beacons provided.

UIDIGI ON RELAY,WIDE,WIDE4-4,WID5E-5 >>
UIDigi RELAY,WIDE,WIDE4-4,WIDE5-5,WIDE6-6,WIDE7-7  (up to 8 calls)

UIFLOOD  ##LNK,30, NOID >>
UIFlood  ##LNK and
Uicheck 30 and
UIFLDfl 0

UITRACE WIDE,30
UITrace WIDE
--------------------

That should be it!

73,
Greg
WB6ZSU