[aprssig] UIDIGI Settings for New n-N

[Greg Noneman]

On Jan 12, 2005, at 5:50 AM, Robert Bruninga wrote:

> Thanks greg.  Perfect!
> Yes, I will need the UIDIGI-ROM settings as well.
> This is exciting...
> Bob

Bob,

Here are the translations from the KPC-3 commands to UIDIGI-ROM.  The 
full commands are listed, with the capitalized letters being the 
abbreviated version.

--------------------
HID >>    
N/A. No equivalent

CD >>
N/A. No equivalent

UIDWAIT >>
N/A. No equivalent

UIFLOOD with NOID >>
UIFLDfl 0 (Setting to 0 disables ID after last WIDEn-N digied)

BLT 1 EVERY 00:20:00 START 00:00:00 >>
BEacon 1 1200 and
BEACONOffset 1 0

BLT 2 EVERY 00:40:00 START 00:10:00 >>
BEacon 2 2400 and
BEACONOffset 2 600

BLT 3 EVERY 01:20:00 START 00:30:00 >>
BEacon 3 4800 and
BEACONOffset 3 1800

BLT 4 >> N/A. Only 3 beacons provided.

LTP 1 APN83 >>
Bdl 1 (blank) and
UNproto APNU19 (assuming version 1.9)

LTP 2 APN383 VIA WIDE >>
Bdl 2 WIDE

LTP 3 APN83 VIA WIDE2-2 >>
Bdl 3 WIDE2-2

LTP 4 >> N/A. Only 3 beacons provided.

LT 1 !DDMM.hhNLDDDMM.hhW#…… >>
BText 1 !DDMM.hhNLDDDMM.hhW#…..

LT 2 !DDMM.hhNLDDDMM.hhW#….. >>
BText 2 !DDMM.hhNLDDDMM.hhW#…..

LT 3 !DDMM.hhNLDDDMM.hhW#….. >>
BText 3 !DDMM.hhNLDDDMM.hhW#…..

LT 4 >> N/A. Only 3 beacons provided.

UIDIGI ON RELAY,WIDE,WIDE4-4,WID5E-5 >>
UIDigi RELAY,WIDE,WIDE4-4,WIDE5-5,WIDE6-6,WIDE7-7  (up to 8 calls)

UIFLOOD  ##LNK,30, NOID >>
UIFlood  ##LNK and
Uicheck 30 and
UIFLDfl 0

UITRACE WIDE,30
UITrace WIDE
--------------------

That should be it!

73,
Greg
WB6ZSU