[TangerineSDR] TangerineSDR Board Sizes and Mock-up

Rick - W2GPS w2gps at cnssys.com
Sat Sep 21 16:24:15 EDT 2019


All,

I have been working on the clock module to see if the proposed size for the clock module is reasonable. Attached is a 3D top view showing major components. Not shown is the D/A to drive the OCXO and various minor components. These may wind up on the bottom of the board.

Rick
W2GPS

-----Original Message-----
From: TangerineSDR <tangerinesdr-bounces at lists.tapr.org> On Behalf Of Scotty Cowling via TangerineSDR
Sent: September 17, 2019 11:50 AM
To: TAPR TangerineSDR Modular Software Defined Radio <tangerinesdr at lists.tapr.org>
Cc: Scotty Cowling <scotty at tonks.com>
Subject: [TangerineSDR] TangerineSDR Board Sizes and Mock-up

Here is a sneak preview of part of the TangerineSDR talk I will be giving at DCC on Saturday.

Rick, this should be enough information on the PCB sizes to figure out if we have enough room or not.

The CKM can be extended downward and/or to the right (when looking at the assembly with the RPi I/O connector on top). We may have to make the DE board larger anyway, if our CAD guy needs more routing room.

73,
Scotty WA2DFI
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ClockModule.PDF
Type: application/pdf
Size: 168528 bytes
Desc: not available
URL: <http://lists.tapr.org/pipermail/tangerinesdr_lists.tapr.org/attachments/20190921/af014253/attachment-0001.PDF>


More information about the TangerineSDR mailing list