[nos-bbs] log triggers & shell scripts

[maiko at pcsinternet.ca]

Sorry, correction, it is hardcoded in main.c, so that's not the issue.

Send me your autoexec.nos trigger entries if you don't mind ?

And the shell script you're trying to use.

Maiko

On 2025-03-09 15:02, Andrew wrote:
> Hi Maiko,
> Yes, I saw the addendum write-up. It was very helpful for the
> format.But did not see anything about defining in config.h.
> What is needs defined? I don't see anything that mentions triggers in
> my config.h or the config.h.default file.
> 
> Andrew - K1YMI
> 
> On Sun, Mar 9 2025 at 02:51:57 PM -05:00:00, Maiko
> <maiko at pcsinternet.ca> wrote:
> 
>> there is a small writeup in the jnos 2.0 addendum on my documents
>> page at www.langelaar.net/jnos2, just put your scripts under the
>> /jnos or whatever your /jnos root dir is ... i assume you have
>> triggers defined in your config.h ?
>> maiko/ve4klm
>> 
>> On March 9, 2025 1:39:11 p.m. CDT, Andrew <k1ymi at k1ymi.com> wrote:
>> 
>>> Based on the information here
>>> 
>> 
> http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/2020-April/005535.html
>>> 
>>> I am trying to fire off a shell script on a log trigger event, but
>>> the script does not seem to execute.
>>> I believe permissions are correct and it's executable. It also
>>> runs fine when ran manually from command line under the same user
>>> as JNOS.
>>> Even if I try and run a 'shell ./shell_script.sh from the JNOS
>>> admin console it does not seem to execute.
>>> Is there a specific directory shell scripts should be in?
>>> 
>>> Andrew - K1YMI
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org