[nos-bbs] Connecting JNOS and the linux ax.25 kernel... possible?

[Maiko Langelaar (Personal)]

Oops, I read that wrong - kiss2net vs net2kiss ?

On 12/20/24 10:00, Maiko Langelaar (Personal) wrote:
>
> Now that Chris has mentioned kiss2net, give this a GOOD read :
>
> https://www.langelaar.net/jnos2/documents/j2addendum.txt
>
> Check out section :
>
>    5.2) Baycom Board
>
> You 'might' be able to use this if I am reading this thread correctly.
>
>    net2kiss has long not been required (it can be direct now)
>
>   * with the disclaimer that this is not the case for all situations, 
> but a few ...
>
> Maiko
>
> On 12/20/24 08:37, Chris Maness wrote:
>> Yes, check out kiss2net command and also kisnet. I do this to get a 
>> loopback to FBB from the command line connection to the Linux NETROM 
>> node software.
>>
>> Thanks,
>> Chris Maness
>> -Sent from my iPhone
>>
>>
>> On Thu, Dec 19, 2024 at 4:38 PM Ben Cranston 
>> <bcranston at wideopenwest.com> wrote:
>>
>>     Bob,
>>     Thanks for the reply.  So there is a way to “go direct” between
>>     JNOS and something like pat.  I’m been trying to figure out how
>>     to have JNOS offer up a virtual serial port for pat to connect as
>>     a KISS endpoint.  At least that’s how I understand what you were
>>     saying is a possible path. I can see how to setup pat to connect
>>     to a KISS TNC via serial port, but am unsure how to get JNOS to
>>     offer one. Direwolf creates a /dev/pts/X device and that’s what
>>     I’m having JNOS attach asy to for sending packets out the RF
>>     port.  Any an all guidance on how to setup this kiss link would
>>     be appreciated.  I’ve been pouring over the documentation and all
>>     I’ve managed to do so far is get JNOS to crash repeatedly. 
>>     Thanks again!
>>
>>     73,
>>     Ben
>>
>>     > On Dec 19, 2024, at 5:00 PM, Boudewijn (Bob) Tenty
>>     <bob at tenty.ca> wrote:
>>     >
>>     > Hi Ben,
>>     >
>>     > I looked at the Pat Videos and you just create a kiss link
>>     between JNOS and Pat to reach WinLink or you can make the kiss
>>     link between Linux and Pat. It is just one of common ways these
>>     programs are linked for ax25.
>>     > You can link almost everything. Welcome to the list by the way!
>>     >
>>     > 73,
>>     >
>>     > Bpb (Boudewijn) VE3TOK
>>
>>
>>     _______________________________________________
>>     nos-bbs mailing list
>>     nos-bbs at lists.tapr.org
>>     http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org
>>
>>
>> _______________________________________________
>> nos-bbs mailing list
>> nos-bbs at lists.tapr.org
>> http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20241220/fad1024b/attachment.htm>