[nos-bbs] Bpq <~~>Jnos connects & forwading

[Don Moore]

Any ideas would certainly be helpful.

Regards,
Don


On Fri, Dec 13, 2024 at 11:26 AM Don Moore <ve3zda at gmail.com> wrote:

> Oh yes, a ping always works.
>
> Regards,
> Don
>
>
> On Fri, Dec 13, 2024 at 11:25 AM Don Moore <ve3zda at gmail.com> wrote:
>
>> I too have been having similar issues but cannot find the problem.
>> I run jnos and noticed that when I start up jnos then I can ax25 connect
>> to a bpq . Until the link is established then I can netrom connect. However
>> if I walk away from jnos even for 10 minutes and I try either connect the
>> F9 screen shows no response from the other end. Once I restart jnos
>> everything is as above. It’s just like chasing my tail and never catching
>> it.
>>
>>
>> Regards,
>> Don - ve3zda
>>
>>
>> On Thu, Dec 12, 2024 at 9:52 PM jerome schatten <romers at shaw.ca> wrote:
>>
>>> I am running bpq and  one of my forward partners is running jnos. This
>>> worked ok for us for several years until something went haywire. From the
>>> beginning,  as long as my pi was in the DMZ we could connect and forward by
>>> either netrom or ax25. He showed as linked to me and I to him.
>>>
>>> Recently, the link on one or both ends drops and although we can both
>>> still see . each others node broadcasts, any attempt at my end to connect
>>> generates a message from my  side, that his node has disappeared.
>>>
>>> Restarting the jnos side usually results  in being able to connect and
>>> forward again for a fewminutes and then it dies again.
>>>
>>> We have tried everything we could think of and now ask for some ideas.
>>>
>>> jerome - ve7ass
>>>
>>>
>>> Sent from my iPhone
>>> _______________________________________________
>>> nos-bbs mailing list
>>> nos-bbs at lists.tapr.org
>>> http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20241213/7274d349/attachment.htm>