[nos-bbs] RIP2?

[Boudewijn (Bob) Tenty]

Udp port 520 needs to be  open otherwise you can't receive the rip broadcasts by the ampr-ripd daemon or another daemon for that.
Also let ipip (to be precise ipencap) into your PI for amprnet, so there is no need to be fully exposed at all. I hope your router
before your PI passes  ipip (ipencap).


Bob VE3TOK

On 2022-11-19 17:39, Chris Maness wrote:
> I have a Pi that used to be in a DMZ, but it is not now.  However, seeing that I can port forward 520/UDP would I be able to get this running without figuring out how to get it back in the DMZ.  Also just realized that the Pi would need to be open for IPIP tunnels. However, I am not sure if an incoming IPIP packet would be searching for a TCP socket, or if is all handled at the lower OSI level below TCP.  So would my Pi that I am using as a 44-net GW have to be fully exposed to the internet or if there is a firewall rule I can add to get around this on my router without trying to figure out how to get this thing back in the DMZ.  I have 5 static IP's at my house and this Pi has one.
>
> Also, I scanned GW.AMPR.ORG, and I did not see 520 UDP open, but I know very little about RIP.  I had rip44d working a couple of years ago, but
> my 44-net stuff has been down for a while.  Thanks in advance for any help.
>
> Chirs KQ6UP
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at lists.tapr.org
> http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org

-- 
There is nothing permanent except change
  
-Heraclitus