[nos-bbs] Getting started with JNOS and Ampr net

[maiko at pcsinternet.ca]

The biggest issue however is there is no way to really have
have proper IP networking if you run JNOS in a command window,
there are ways, but ...

On 2022-06-18 13:18, maiko at pcsinternet.ca wrote:
> Hi Thomas,
> 
> Sounds like you are running this in a command window ?
> 
> Unless you're running linux, I would stick with JNOS 1.11f ...
> 
> I have JNOS 2.0 for DOS (command window), but it all depends
> what you really want to 'gain' from going to JNOS 2.0, issue
> is simply the amount of available memory to run newer JNOS.
> 
> If you have more specifics, let us know ?
> 
> Maiko / VE4KLM
> 
> On 2022-06-18 12:57, Tom Fuller wrote:
>> Hello All,
>> 
>> I am just getting started with Jnos and ampr net. I have already been
>> assigned a 44 net allocation and I have available
>> 
>> Dos
>> Windows 7
>> Hardware tnc
>> Signalink tnc
>> Dynamic dns service
>> Router ** not sure if I need it though for jnos and ampr net
>> 
>> Can anyone point me to a setup and beginner's guide ? I have looked so
>> far into the jnos documentation from VE4KLM for Jnos 1.1 and 2.0. I
>> have jnos 1.1 configured and working with my hardware tnc for packet
>> radio. I tried jnos 2.0 but it didn't seem to show all the commands
>> that jnos 1.1 showed.
>> 
>> I have looked thru a few sample autoexec.nos files but if anyone could
>> share a sample autoexec.nos file it
>> would be greatly appreciated also that may work with my setup.
>> 
>> Also, does anyone know if there are any beginner's setup guides on how
>> to use ampr net besides the ampr net website ?
>> 
>> Thanks and 73,
>> 
>> Thomas Fuller
>> KE4QCM
>> _______________________________________________
>> nos-bbs mailing list
>> nos-bbs at lists.tapr.org
>> http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org