[nos-bbs] JNOS on Raspberry Pi - Keyboard garbage on start?

[Jay Nugent]

Greetings Brian,

On Fri, 14 Feb 2020, Brian Pasternak wrote:

> Hello everyone. I'm attempting to install JNOS on a Raspberry Pi 3 using
> N8AVX's HOWTO located at  http://www.mi-drg.org/jnos.html.
>
> Everything seems to install properly, but when I start JNOS using "sudo
> ./startnos /dev/tty7" from Putty, I get garbage on the screen, see
> http://delcorc.org/ham/Capture.PNG , whenever I hit any keys. I've
> confirmed that the Localization Options and Keyboard Mappings are correct,
> per the manual. However, if I connect my wireless keyboard and a monitor
> directly up to the Pi, everything works well.
>
> Any advice?

    I'm just waking up here, so my mind is still a bit fuzzy, but I'm 
thinking that you may have missed installing a neccessary package.  I 
think that JNOS required that the NCURSES package be installed so it can 
format the screen correctly.

       --- Jay  WB8TKL
-------------- next part --------------
_______________________________________________

nos-bbs mailing list

nos-bbs at lists.tapr.org

http://lists.tapr.org/mailman/listinfo/nos-bbs_lists.tapr.org