[nos-bbs] JNOS version 2.0k crashes...
Boudewijn (Bob) Tenty
bobtenty at gmail.com
Fri Aug 5 22:26:44 EDT 2016
The "B" command is not the same as telnet as the parser sees that the
"B" command is pressed at the jnos prompt
and prints all that nice bbs stuff to the screen, There is no need to
involve the tcp/ip stack.
On 2016-08-05 03:55 AM, Michael Fox - N6MEF wrote:
> I don't have a KISS connection to an FBB bbs. But I did try:
> jnos> B
> Log into mailbox
> C <kiss-radio-port> <another-jnos-bbs>
> Read mail, etc.
> No problems found.
> You've probably thought of this, and I'm just thinking out loud ...
> I wonder, does the "B" command, which is telnet, support IAC or not?
> I presume the shell's telnet supports IAC.
> So the telnet server port needs to match the client and perhaps that's different between the shell and the "B" command?
>>> On Aug 4, 2016, at 16:31, Boudewijn (Bob) Tenty <bobtenty at gmail.com>
>>> A fellow ham I installed packet for has the following problems with
>>> Jnos crashes (freezes) a lot if he enters "b" from the jnos prompt to
>> access the bbs and
>>> go to for instance FBB over a kiss link and starts reading the mail
>>> It doesn't crashes as far as we can see if the telnets to jnos from the
>> shell prompt and
>>> then starts reading the mail at his FBB bbs.
>>> I used gdb to get a backtrace but there is none.
>>> Bob VE3TOK
>>> On 2016-07-26 12:35 PM, Maiko Langelaar wrote:
>>>> 2.0k.rc IS 2.0k - same thing, just rebranded.
>>>> nos-bbs mailing list
>>>> nos-bbs at tapr.org
>>> nos-bbs mailing list
>>> nos-bbs at tapr.org
>> nos-bbs mailing list
>> nos-bbs at tapr.org
> nos-bbs mailing list
> nos-bbs at tapr.org
More information about the nos-bbs