[nos-bbs] Forwarding to/from BPQ

[Boudewijn (Bob) Tenty]

Yes, I see the protocol error 3 also sometimes.

By the way.. the square brackets are optional in my script and the P 
means poll.
I'm still mystified why I can't get tcp forward to start.

I just was checking my email, back to sleep.

Bob


On 16-04-25 03:22 AM, Michael Fox - N6MEF wrote:
> Using latest bleeding2 I can't get forwarding with BPQ to work reliably.
>
> BPQ -> JNOS:
>
> Forwarding from BPQ to JNOS works sometimes, and sometimes results in JNOS
> sending "Protocole error 3"
>
> The BPQ station is connection to my regular telnet server port "start
> telnet" and puts a dot before it's call sign during login.
>
>
> JNOS -> BPQ:
>
> I can't get forwarding from JNOS to BPQ to work at all.
>
> I create a short, one line message (short subject plus one short line of
> message body).
> I use mbox kick to start forwarding.
>
> If I DO have enableiac in forward.bbs, then I see the subject go out,
> followed by a short amount (about 5 bytes) of data.  But then the session
> hangs and eventually times out.
>
> If I do NOT have enableiac in forward.bbs, then I see the subject go out,
> followed by more binary data (the same 5 bytes as above, plus maybe 100
> bytes more).  Again, the session hangs and eventually times out.
>
> Any ideas?
>
> forward.bbs:
>
> callsign
> tcp <hostname> <port>   (with or without enableiac)
> +user:
> * 1
> .login
> +password:
> * 1
> .passwd
> area1
> area2
> area3
> ----
>
> I can send more logs and traces if desired.  But it sounds like maybe the
> ones I sent previously haven't been looked at yet.  So I don't know what to
> do.
>
> Michael
>
>
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> http://www.tapr.org/mailman/listinfo/nos-bbs