[nos-bbs] Help With JNOS on DOS

Jose Angel Amador Fundora amador at electrica.cujae.edu.cu
Tue Feb 12 08:39:31 EST 2013


I am afraid that the problem is the handling of basic devices, that must 
be done thru the OS, and not directly like MSDOS, until Win98, did.

A few years ago I saw and tried mostly as a curiosity a Windows version 
of JNOS, and it did work on XP.  But I have done no serious operation 
with it.

I had a good experience with MSDOS and Linux, but the newer Windows OS 
impose different requirements.

So, for my "taste" and previous experiences,  the choice is MSDOS 6.22 
or MSDOS 7 as OS, or looking for the WIndows XP version of JNOS.
For real serious operation I reccomend Linux.

73,

Jose, CO2JA


El 11/02/2013 23:44, Chris Maness escribió:
> I am trying help a friend get a very basic JNOS install going.  He is
> running Windows XP (which I realize might be the problem).  JNOS does
> not seem to be attaching to his TNC (in kiss mode).  The device tnc0
> is not initiated after the attach command and we are getting all the
> error messages to that effect.
>
> Here is the contents of the autoexec.nos file:
>
>
> #
> # This is an autoexec.nos file for WA6TJQ
> #
> #domain cache size 30
> #domain suffex ampr.org
> #domain translate on
> #domain verbose on
> #domain addserver kq6up
> #
> #
> #
> ip address 44.18.45.1
> hostname wa6tjq
> ax25 mycall WA6TJQ-4  #This must preced "attach"
> #
> #
> #
> attach asy 0x3f8 4 ax25ui tnc0 2048 256 9600 # Attaches a TNC to COM1
> #
> # Set parameters for the TNC
> #
> param tnc0 1 20 # TX Delay (x10ms)
> param tnc0 2 63 # Persistance (0-255)
> param tnc0 3 10 # Slot Time (x 10ms)
> param tnc0 4 10 # TX Tail (x 10ms)
> param tnc0 5 0  # 0=HDX
> param tnc0 dtr 1
> param tnc0 rts 1
> #
> # Start some stuff!
> #
> start ftp
> start finger
> start remote
> start echo
> start ttylink
>
> I run JNOS in Linux and have no problems. I also realize that he would
> have no loopback with this file, but I just want to verify we can get
> his JNOS talking to his TNC.
>
> His TNC is set in 1200 baud mode, so we also tried changing the 9600
> to 1200 in the attach command with no luck.
>
> Thanks,
> Chris Maness KQ6UP
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> http://www.tapr.org/mailman/listinfo/nos-bbs


-- 
MSc Ing. José Angel Amador Fundora
Profesor Auxiliar
Departamento de Telecomunicaciones y Telemática
Facultad de Ingeniería Eléctrica, CUJAE
Calle 114 % 11901 e/ Rotonda y Ciclovía,
Marianao 11500, La Habana, Cuba



48 Aniversario del Instituto Superior Politecnico Jose Antonio Echeverria, Cujae
Una obra de la Revolucion Cubana | 2 de diciembre de 1964 | http://cujae.edu.cu



Consulte la enciclopedia colaborativa cubana. http://www.ecured.cu



More information about the nos-bbs mailing list