[nos-bbs] Jnos networking problem

Wed Aug 14 13:49:40 EDT 2013

Have you an are publish on your linux box?

You need to satisfy layer 2. Your jnos has no mac address and so your dsl
router cannot find it. Bear in mimd that on your LAN things happen at the
mac layer.

In short you tell  your linux box to advertise itself as the holder of the
jnos tun0 address.  Dsl will swnd packets to linux which will then look at
the IP layer and move it on to jnos.
On Aug 13, 2013 4:20 AM, "Miguel Bahi Cruz" <miguelbahi_cruz at hotmail.com>
wrote:

> Jerome, thanks for your answer.****
>
>
>
> I try your suggestion, but don't have success****
>
>
>
> My setup is this:****
>
> Tun0  jnos side  : 192.168.0.201 ****
>
> Tun0 linux side : 192.168.0.200****
>
> Lan eth0 ubuntu : 192.168.0.21****
>
> DSL Router : 192.168.0.30****
>
>
> The pings in the lan to 192.168.0.201  respond ok, and I  log without
> problems, in the telnet in jnos session, in the same Linux machine, or in a
> Windows pc in my lan ( adding static route  route add 192.168.0.201
> 192.168.0.21 ).****
>
>
> I have configured in my DSL router  the IP Tun0  jnos side  :
> 192.168.0.201, as a DMZ****
>
>
> -if I make a telnet to my IP public address, it fails.
>
>
> -I try to config my router with NAT port forwarding the port 23 mapped to
> 192.168.0.201, if I make a telnet to my IP public address, it fails.****
>
>
> -Other tests, is activate port triggering in tcp 23 ( I disable the
> previous nat setting mapping to port 23 ),  it fails too.****
>
>
> - I don’t  try this two last settings at the same time.****
>
>
>
> My jnos test node continues in a island, please I need more help.****
>
>
> Thanks.****
>
> ** **
>
> ** **
>
> ** **
>
>
> > Date: Wed, 7 Aug 2013 12:13:47 -0700
> > From: romers at shaw.ca
> > To: nos-bbs at tapr.org
> > Subject: Re: [nos-bbs] Jnos networking problem
> >
> > Miguel...
> >
> > I have been down this road too (only with cable rather than dsl).
> >
> > I concluded that only if you're using port forwarding do you need the
> > static routing. If you're not using port forwarding, then put the jnos
> > lan address of tun0 into the DMZ and it should just work.
> >
> > You will need to protect yourself against intruders by using 'tcp access
> > permit' statements in autoexec.nos
> >
> > I have never had a problem with the system configured in this manner.
> > You can see the bad guys sending syn packets trying to get in, but they
> > can't get passed the 'tcp access' if they're not on the list.
> >
> > Best,
> > jerome - ve7ass
> >
> >
> > On 13-08-07 11:07 AM, Miguel Bahi Cruz wrote:
> > >
> > >
> > > Hi, This is mi firs msg to the list, as a presentation of myself, and
> > > make first question to the list.
> > >
> > >
> > > I have a test node in Jnos 2.0j under ubuntu Linux 10.04 LTS. The node
> > > basically is working ok. Now I want internet connectivity for give
> > > access to the users or myself, to the node to telnet, and link with
> > > other ampr nodes thru AXIP link, and converse nodes, to the rest of
> > > the world net.
> > >
> > >
> > > I am making a config scenario similar to Maiko makes in his setup like
> > > this graphic
> > >
> http://www.langelaar.net/projects/jnos2/documents/practical/jnosntwk.jpg
> > >
> > >
> > > The only difference is , that my Linux runs under a virtual machine in
> > > VMware Server v1, in a Windows 2003 Server ES R2 SP2server machine.
> > >
> > >
> > >
> > > The problem is the config don’t works, because my ADSL router don’t
> > > support add a static route like Maiko make in his router ( the DMZ
> > > feature if is implemented and activated but is not sufficient to work
> > > in my case ). I need make a static route between the adsl router and
> > > the jnos box.
> > >
> > >
> > > Asking to Maiko about this, we speak in different solutions:
> > >
> > >
> > > -Activate a router in Ubuntu, and add this static route between the
> > > adsl router and Linux box.
> > >
> > > -Use a external physical router between the router adsl and the server
> > > machine, I have a Linkys WRT54GL with firmware DD-WRT, with very
> > > flexible config options.
> > >
> > >
> > > The first option is very difficult to me, because I am not Linux
> > > expert. Any help is welcome
> > >
> > >
> > > I try the second option using two lan ports of the lan side of the
> > > linksys router (1 connect to server machine ( Ubuntu Linux ) and the
> > > other to ADSL router, and I added a static route in the router to jnos
> > > box ( all in the same subnet ) in to Linux box, but the pings and
> > > telnet don’t Works.
> > >
> > >
> > > I am now trying making new config with different subnets ( use the
> > > lan, and wan side of the router ), but I have more doubts.
> > >
> > > Fort this I ask about help about this.
> > >
> > >
> > > Thanks in advance
> > >
> > >
> > > ------------------------------------------------------
> > >
> > > Miguel Bahi Cruz
> > >
> > > Telecomunicationes Engineer
> > >
> > > EB5JEQ Amateur Radio Station www.eb5jeq.es
> > >
> > >
> > >
> > > email y skype : miguelbahi_cruz at hotmail.com
> > >
> > > Linkedin : http://es.linkedin.com/pub/miguel-bahi-cruz/1a/715/495
> > >
> > > Web : http://www.miguelbahi.name
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > nos-bbs mailing list
> > > nos-bbs at tapr.org
> > > http://www.tapr.org/mailman/listinfo/nos-bbs
> >
> > _______________________________________________
> > nos-bbs mailing list
> > nos-bbs at tapr.org
> > http://www.tapr.org/mailman/listinfo/nos-bbs
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> http://www.tapr.org/mailman/listinfo/nos-bbs
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20130814/57937568/attachment.html>