[nos-bbs] usb -> serial help..

[Michael Fox - N6MEF]

Also, most TNC autobaud works based on the "*" character.  So the first
characters you type should be "*" until it echoes one back properly.
Usually it only takes one or two.

 

 

From: nos-bbs-bounces at tapr.org [mailto:nos-bbs-bounces at tapr.org] On Behalf
Of Bob Tenty
Sent: Friday, November 30, 2012 5:57 PM
To: TAPR xNOS Mailing List
Subject: Re: [nos-bbs] usb -> serial help..

 

I think the Kam-XL has automatic speed detection at the serial port I
believe`
and falls back to that after reset.

You should check your manual and check what the default RS232 settings are 
after a reset.
I  believe it is 1200 Baud so set Minicom for that.
Also check the handshaking, I believe it defaults to software
handshaking.(Flow Control)
and also check the data setting.

73,

Bob VE3TOK




 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20121130/5cd0c260/attachment.html>