[nos-bbs] Soundmodem compile fail (try this instead)

[Chris Maness]

On Wed, May 2, 2012 at 3:59 PM, Bill Vodall <wa7nwp at gmail.com> wrote:
> Progress of sorts to report...   After a brief but futile attempt to
> compile the  JNOS TUN.c module on my old 6.06 Ubunutu Linux box I
> finally remembered the earlier technique using SLattach to create a
> SLIP interface.   That worked out of the box once I found an old code
> snipped so my JNOS system is finally on the local LAN...
>
>> Chris wrote:
>> As far as using JNOS to attach to AGWPE or UZ7HO.  I am getting some
>> mangled looking packets.  Any suggestions as to what is going on here?
>
> The JPG Chris provided had:
>
>  2:Fm KQ6UP-10 to WA6TJQ-8 <SABM P>
>  1:Fm UP-6 to -6 via U8KQ6U*,,,-5<RR R0 >
>
> I had to run to work so I didn't see if any of the incoming traffic on
> 20 meters would show up in the JNOS trace session and heard screen.  I
> did try "transmitting" on the connection.
>
> I tried:   C HF N7ZIO   (from WA7NWP-10)
>
> I saw trace packets on the UZ7HO screen similar to Chris.  I'll have
> more detail once I'm home from work in about 3 hours.   At the same
> time I'll be turning on the AGWPE emulator in the BPQ32 system and
> have a second interface as an additional data point.
>
> How could I go this long without a JNOS system on the air?
>
> 73
> Bill - WA7NWP
>

Bill, I found that I got the same mangled packets weather I used UZ7HO
or AGWPE.  So it seems to be coming from the JNOS side.  I am glad
that you were able to confirm this.

Regards,
Chris Maness