[nos-bbs] Setting up for basic packet radio

[Chris Maness]

Ok, just make sure the baudrate of the modem matches that in the attach command.

Chris

On Mon, Mar 26, 2012 at 6:47 PM, Brett Friermood
<brett.friermood at gmail.com> wrote:
> I added those and it took them. This is a temporary type setup so I'll
> have to hook it up and try it tomorrow.
>
> I'll let you know how it goes.
> Brett
> KC9MWG
>
>
> On Mon, Mar 26, 2012 at 3:32 PM, Maiko Langelaar <maiko at pcs.mb.ca> wrote:
>>
>> You're missing TxDelay for one thing. Without it, your packets
>> will be 'half gone' before the radio is even up to speed type
>> of thing. This is what the installer gives everyone below :
>>
>>  # change 9600 to 4800 to match serial port rate on your radio
>>  attach asy ttyS0 - ax25 vhf 4096 256 9600
>>
>>  ifconfig vhf description "vhf - 1200 baud port"
>>
>>  param vhf 2 256
>>  param vhf 3 1
>>  param vhf 5 1
>>
>>  # tx delay of 250 milliseconds, you can try (20) 200, might
>>  # be too short, but then again I don't know today's radios.
>>  param vhf TxDelay 25
>>
>>  ax25 bctext "my packet station"
>>  ax25 bcinterval 1200
>>  ax25 bc vhf
>>
>> Maiko
>>
>>
>>
>> _______________________________________________
>> nos-bbs mailing list
>> nos-bbs at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs