[nos-bbs] Setting up for basic packet radio

[Brett Friermood]

I added those and it took them. This is a temporary type setup so I'll
have to hook it up and try it tomorrow.

I'll let you know how it goes.
Brett
KC9MWG


On Mon, Mar 26, 2012 at 3:32 PM, Maiko Langelaar <maiko at pcs.mb.ca> wrote:
>
> You're missing TxDelay for one thing. Without it, your packets
> will be 'half gone' before the radio is even up to speed type
> of thing. This is what the installer gives everyone below :
>
>  # change 9600 to 4800 to match serial port rate on your radio
>  attach asy ttyS0 - ax25 vhf 4096 256 9600
>
>  ifconfig vhf description "vhf - 1200 baud port"
>
>  param vhf 2 256
>  param vhf 3 1
>  param vhf 5 1
>
>  # tx delay of 250 milliseconds, you can try (20) 200, might
>  # be too short, but then again I don't know today's radios.
>  param vhf TxDelay 25
>
>  ax25 bctext "my packet station"
>  ax25 bcinterval 1200
>  ax25 bc vhf
>
> Maiko
>
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs