[nos-bbs] how to get encap?

[Bob Tenty]

Hi Steve,

You need also a static commercial ip number from your provider if you 
want to route an amprnet subnet for your area.

You register that info with the robot of Jim Fuller.

That info is here:

http://www.ampr-gateways.org/updates/updates.html

A new gateways list will be made once a day by the computer with all 
gateway info and from that list a
"encap.txt" will be extracted what is your routing table to other subnets.
Both are available for download.
You can make use of this encap txt or the rip table broadcast by ucsd.
Most gateways convert the encap.txt to its linux equivalent with a 
script ("munge" script) and use it in that way.

You can subsribe to the list of amprnet gateway operators at:

http://hamradio.ucsd.edu/mailman/listinfo/44net

All gateway operators are members of this list. (hopefully)


Write me off list if you need more info and example of an entry, etc.

73,

Bob (Boudewijn) VE3TOK



On 12-04-03 05:56 AM, Steve Daniels wrote:
>
> Hi All
>
> Just getting back into NOS using JNOS2 after a very long break from it 
> all (1996) so really I am new
>
> And fighting my way through setting up  again, I have an ampr address 
> and IP and from what I can find it would seem I need to register 
> somewhere to be included in encap or the rip system, and even to get 
> others via those methods
>
> Trouble is the only contact I could find seemed to be an invalid email 
> address.
>
> Any help pointing me in the right direction would be appreciated
>
> Steve Daniels
>
> G6UIM
>
>
>
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/nos-bbs_lists.tapr.org/attachments/20120403/93a0a436/attachment.html>