[nos-bbs] Jnos2 - Tun0 not working

[ve1fyi]

did you go into etc/sysctl.conf and make the needed
changes there to allow the packets to pass...
----- Original Message ----- 
From: "jerome schatten" <romers at shaw.ca>
To: <nos-bbs at tapr.org>
Sent: Wednesday, November 17, 2010 1:04 PM
Subject: [nos-bbs] Jnos2 - Tun0 not working


> Ubuntu 10.1 on a Celeron 2.8 Ghz; 512M memory; Linux 2.63.31-21.
> 
> Jnos version: 2.0c5b. and everything I've tried is working fine but Tun0
> (so far).
> 
> Long time back, this very version was working on a Slackware 10.0 system
> and Tun0 was working too. Seems to me that I had to recompile the kernel
> with 'slip' support in order to get Tun0 to go (I only dimly remember
> this).
> 
> So.. how to get Tun0 to go with Ubuntu is my first question -- do I need
> to recompile this kernel?
> 
> Second, I'm running Ubuntu in the GUI mode but would like to be able to
> select either the GUI or Command line at boot time. How to do this?
> 
> TIA for any suggestions,
> Jerome - VA7VV
> Vancouver
> 
> 
> _______________________________________________
> nos-bbs mailing list
> nos-bbs at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/nos-bbs