[nos-bbs] SCS modem does pactor
pa3gjx at home.nl
pa3gjx at home.nl
Thu Mar 6 17:42:29 EST 2008
Hello All,
I found out that when the SCS modem is set to hostmode you have to switch the pactor listen mode on in jhost mode. Normaly this is on by default and should not be a problem.
Also i had a callsigng mix up, it seems not possible to connect to the same call al your Jnos to forward to I tryed to go around with BBS call sing PI8YSM and use ifconfig and MYCall in PTCII.cfg but when i used another call sing it worked.
<snip>
20:09:51 - JNOS 2.0fB_UBUNTU7.04 (Linux) was started (availmem=3085262848)
20:09:51 - entry into keyboard_to_hfdd
20:09:51 - waiting for forwarding socket to be assigned
20:09:52 - PTC - we are IRS
20:09:52 - no pactor connection
20:09:52 - pactor speed level 1
20:10:02 - cbuf [h]
20:10:02 - cbuf [ptcII]
20:10:02 - cbuf [pa3duv]
20:10:02 - trying [pa3duv]
20:10:02 - PTC - we are ISS
20:10:03 - DATA (26) [[04][03](4) CONNECTED to PA3DUV[00]]
20:10:04 - pactor 1 connection
20:10:04 - pactor speed level 0
20:10:04 - [pa3duv] connected - assign socket pair
20:10:04 - waiting for SID from remote bbs
20:10:04 - pactor 2 connection
20:10:05 - entering the read-from-keyboard loop
20:10:48 - DATA (29) [[04][03](4) DISCONNECTED fm PA3DUV[00]]
20:10:48 - PTC - channel busy
20:10:48 - PTC - we are IRS
20:10:48 - no pactor connection
20:10:48 - pactor speed level 1
<snip>
Few thing remain.
Best 73' Jan pa3gjx
More information about the nos-bbs
mailing list